Your journey to pass the 300-208 : latest questions & dumps for the Cisco 300-208 exam
Passing the 300-208 exam looks very easy, but the truth is that this is the hardest exam to pass. In order to get good grades on the Cisco 300-208 exam, it requires your dedication, hard work and the most accurate preparation materials. I think that achieving good results in the Cisco 300-208 is the secret to success. First, be prepared, then make a decision from where you must looks for the latest 300-208 exam dumps, and then proceed with the research. I recommend https:/ /www.pass4itsure.com/300-208.html.
What should you know before studying the 300-208?
Each exam and certification has different requirements. If this is a serious attempt, be sure to read the prerequisites first. Nothing is worse than wasting a few months to learn an exam that you can’t take or an exam that doesn’t help you get certified!
The exam objectives for each exam are different and are usually provided by the certification provider. These usually tell the candidate what topics are relevant, what they need to know and why the exam is trying to cover these topics. Be sure to find the answer for your 300-208 exam.
Please see below !
About 300-208
300-208 SISAS
Implementing Cisco Secure Access Solutions
Exam Number: 300-208
Associated Certifications: CCNP Security
Duration: 90 minutes (55 – 65 questions)
Available Languages: English, Japanese
Register for Exam: Pearson VUE
More about cisco exams, please click here.
The Implementing Cisco Secure Access Solutions (SISAS) (300-208) exam tests whether a network security engineer knows the components and architecture of secure access by utilizing 802.1X and Cisco TrustSec.
Learning Resources
- Implementing Cisco Secure Access Solutions (SISAS) v1.0CLN Store Content
- Implementing Cisco Secure Access Solutions (SISAS)
- CCNP Security SISAS 300-208 Official Cert Guide Premium Edition and Practice Test
Knowledge point
| Identity Management/Secure Access | 33% | Focus |
| Threat Defense | 10% | |
| Troubleshooting, Monitoring and Reporting Tools | 7% | |
| Threat Defense Architectures | 17% | |
| Identity Management Architectures | 33% | Focus |
What does 300-208 focus on?
Like all tests, CCNP securely implements Cisco Secure Access Solution (SISAS), and Cisco has a degree of freedom in a variety of subjects.This means understanding most of the 300-208 content as they are randomly tested on many of the available themes.
You can focus on your weak links and important management points (Identity Management/Secure Access, Identity Management Architectures) to enhance learning.
How to reduce the chance of failure of the 300-208 exam?
At the beginning, it was difficult for me to pass the 300-208 exam, but after purchasing 300-208 Implementing Cisco Secure Access Solutions research materials, my problem disappeared.The most relevant and all necessary data is available. The Cisco 300-208 exam questions that are important from an exam perspective are well documented through PDF files.
If you want to succeed in the Cisco 300-208 exam, you should undoubtedly use the 300-208 Question Answer PDF to prepare for the final 300-208 exam.
You will get enough information from the 300-208 dump, which is likely to solve all problems with Pass4itsure’s real learning materials.
latest questions for the Cisco 300-208 exam(8)
QUESTION 1
CORRECT TEXT
The Secure-X company has started to tested the 802.1X authentication deployment using the Cisco Catalyst 3560-X
layer 3 switch and the Cisco ISEvl2 appliance. Each employee desktop will be connected to the 802.1X enabled switch
port and will use the Cisco AnyConnect NAM 802.1X supplicant to log in and connect to the network. Your particular
tasks in this simulation are to create a new identity source sequence named AD_internal which will first use the
Microsoft Active Directory (AD1) then use the ISE Internal User database. Once the new identity source sequence
has been configured, edit the existing DotlX authentication policy to use the new AD_internal identity source sequence.
The Microsoft Active Directory (AD1) identity store has already been successfully configured, you just need to reference
it in your configuration.
In addition to the above, you are also tasked to edit the IT users authorization policy so IT users who successfully
authenticated will get the permission of the existing IT_Corp authorization profile.
Perform this simulation by accessing the ISE GUI to perform the following tasks:
Create a new identity source sequence named AD_internal to first use the Microsoft Active Directory (AD1) then use the
ISE Internal User database
Edit the existing Dot1X authentication policy to use the new AD_internal identity source sequence:
If authentication failed-reject the access request
If user is not found in AD-Drop the request without sending a response
If process failed-Drop the request without sending a response
Edit the IT users authorization policy so IT users who successfully authenticated will get the permission of the existing
IT_Corp authorization profile.
To access the ISE GUI, click the ISE icon in the topology diagram. To verify your configurations, from the ISE GUI, you
should also see the Authentication Succeeded event for the it1 user after you have successfully defined the DotlX
authentication policy to use the Microsoft Active Directory first then use the ISE Internal User Database to authenticate
the user. And in the Authentication Succeeded event, you should see the IT_Corp authorization profile being applied to
the it1 user. If your configuration is not correct and ISE can\\’t authenticate the user against the Microsoft Active
Directory, you should see the Authentication Failed event instead for the it1 user.
Note: If you make a mistake in the Identity Source Sequence configuration, please delete the Identity Source Sequence then re-add a new one. The edit Identity Source Sequence function is not implemented in this simulation.
Correct Answer: Review the for full configuration and solution.
Step 1: create a new identity source sequence named AD_internal which will first use the Microsoft Active Directory
(AD1) then use the ISE Internal User database as shown below:
Step 2: Edit the existing Dot1x policy to use the newly created Identity Source:
Then hit Done and save.
QUESTION 2
CORRECT TEXT
The Secure-X company has recently successfully tested the 802.1X authentication deployment using the Cisco Catalyst
switch and the Cisco ISEv1.2 appliance. Currently, each employee desktop is connected to an 802.1X enabled switch
port and is able to use the Cisco AnyConnect NAM 802.1Xsupplicantto log in and connect to the network.
Currently, a new testing requirement is to add a network printer to the Fa0/19 switch port and have it connect to the
network. The network printer does not support 802.1X supplicant. The Fa0/19 switch port is now configured to use
802.1X
authentication only.
To support this network printer, the Fa0/19 switch port configuration needs to be edited to enable the network printer to
authenticate using its MAC address. The network printer should also be on VLAN 9.
Another network security engineer responsible for managing the Cisco ISE has already per-configured all the
requirements on the Cisco ISE, including adding the network printer MAC address to the Cisco ISE endpoint database
and etc…
Your task in the simulation is to access the Cisco Catalyst Switch console then use the CLI
to:
Enable only the Cisco Catalyst Switch Fa0/19 switch port to authenticate the network printer using its MAC address
and:
Ensure that MAC address authentication processing is not delayed until 802.1Xfails
Ensure that even if MAC address authentication passes, the switch will still perform 802.1X authentication if requested
by a 802.1X supplicant
Use the required show command to verify the MAC address authentication on the Fa0/19 is successful
The switch enable password is Cisco For the purpose of the simulation, to test the network printer, assume the network
printer will be unplugged then plugged back into the Fa0/19 switch port after you have finished the required
configurations on the Fa0/19 switch port. Note: For this simulation, you will not need and do not have access to the ISE
GUI To access the switch CLI, click the Switch icon in the topology diagram
Correct Answer: Review the for full configuration and solution.
Initial configuration for fa 0/19 that is already done:
AAA configuration has already been done for us. We need to configure mac address bypass on this port to achieve the
goal stated in the question. To do this we simply need to add this command under the interface:
mab
Then do a shut/no shut on the interface.
Verification:
QUESTION 3
Drag and drop the portals from the left onto the correct portal tasks on the right.
Select and Place:
Correct Answer:
Certificate provisioning = Request a certificate for a device that is unable to use onboarding support Client provisioning
= Provide a posture assessment for a device My Devices = Register a lost device Blacklist = Remove a device
QUESTION 4
Drag and drop each posture assessment outcome from the left onto the appropriate definition on the right.
Select and Place:
Correct Answer:
Noncompliant = NAC agent determined something on the endpoint is in violation of the defined security policy
Compliant = NAC agent on the endpoint determined that the software assessment on the endpoint adheres to the
security policy Unknown = The endpoint failed to report a posture assessment to ISE.
QUESTION 5
Drag and drop the posture remediation actions from the left onto the correct descriptions on the right.
Select and Place:
Correct Answer:
QUESTION 6
Drag and drop each guest user login screen from the left onto the correct description on the right.
Select and Place:
Correct Answer:
QUESTION 7
A security engineer is deploying Cisco ISE for a company\\’s guest user services. Drag and drop the Cisco ISE persona
on the left onto its function on the right.
Select and Place:
Correct Answer:
QUESTION 8
Drag and drop the BYOD user experiences on an iPad on the left into the correct order on the right.
Select and Place:
Correct Answer:
Free | latest Cisco 300-208 exam dumps
Get latest updated 300-208 Dumps Pdf Visit here:
https://drive.google.com/open?id=1yGrDguPE-fZWvHgzgvNDw0QL7V7hlfCm
https://drive.google.com/open?id=1l_P_jKBj8ZsMyWwcZu_90PQjKDZTtsMW
Pass4itsure can help you prepare for the actual 300-208 exam. It provides you with the latest and relevant online exam questions. https://www.pass4itsure.com/300-208.html has all the real materials available for the 300-208 exam. Pass4itsure offers real 300-208 dumps questions and answers. These types of materials are available in PDF document files and are available for free for 120 days.
