Latest updated Cisco CCDP 300-320 dumps and pdf,latest questions for the Cisco 300-320 exam

Passing the 300-320 exam looks very easy, but the truth is that this is the hardest exam to pass. In order to get good grades on the Cisco 300-320 exam, it requires your dedication, hard work and the most accurate preparation materials. I think that achieving good results in the Cisco 300-320 is the secret to success. First, be prepared, then make a decision from where you must looks for the latest 300-320 exam dumps, and then proceed with the research. I recommend https://www.geekcert.com/300-320.html.

What should you know before studying the 300-320?

Each exam and certification has different requirements. If this is a serious attempt, be sure to read the prerequisites first. Nothing is worse than wasting a few months to learn an exam that you can’t take or an exam that doesn’t help you get certified!

The exam objectives for each exam are different and are usually provided by the certification provider. These usually tell the candidate what topics are relevant, what they need to know and why the exam is trying to cover these topics. Be sure to find the answer for your 300-320 exam.

Please see below !

About 300-320

300-320
Designing Cisco Network Service Architectures (ARCH)
Exam Number: 300-320
Associated Certifications: CCDP
Duration: 75 minutes (60 – 70 questions)
Available Languages: English

Learning Resources

Designing Cisco Network Service Architectures (ARCH) v3.0
Cisco Virtual Internet Routing Lab Personal Edition (VIRL PE)
Cisco Modeling labs

Knowledge point

Advanced Addressing and Routing Solutions for Enterprise Networks	22%	Focus
Advanced Enterprise Campus Networks	20%	Focus
WANs for Enterprise Networks	17%
Enterprise Data Center Integration	17%
Security Services	13%
Network Services	11%

What does 300-320 focus on?

Like all tests, 300-320 ARCH Designing Cisco Network Service Architectures and Cisco has a degree of freedom in a variety of subjects.This means understanding most of the 300-320 content as they are randomly tested on many of the available themes.

You can focus on your weak links and important management points (Advanced Addressing and Routing Solutions for Enterprise Networks , Advanced Enterprise Campus Networks ) to enhance learning.

How to reduce the chance of failure of the 300-320 exam?

At the beginning, it was difficult for me to pass the 300-320 exam, but after purchasing 300-320 Designing Cisco Network Service Architectures Solutions research materials, my problem disappeared.The most relevant and all necessary data is available. The Cisco 300-320 exam questions that are important from an exam perspective are well documented through PDF files.

If you want to succeed in the Cisco 300-320 exam, you should undoubtedly use the 300-320 Question Answer PDF to prepare for the final 300-320 exam.

You will get enough information from the 300-320 dump, which is likely to solve all problems with geekcert’s real learning materials.

latest questions for the Cisco 300-320 exam(13)

QUESTION 1
Which two of these are characteristics of multicast routing? (Choose two.)
A. multicast routing uses RPF.
B. multicast routing is connectionless.
C. In multicast routing, the source of a packet is known.
D. When network topologies change, multicast distribution trees are not rebuilt, but use the original path
E. Multicast routing is much like unicast routing, with the only difference being that it has a a group of receivers rather
than just one destination
Correct Answer: AC

QUESTION 2
Which two technologies provide web and URL filtering and mitigate zero-day malware? (Choose two.)
A. Cisco CWS
B. Cisco WSA
C. Cisco GETVPN
D. Cisco ESA
E. NAT/PAT
Correct Answer: AB
Cisco CWS: Cisco Cloud Web Security https://www.cisco.com/c/en/us/products/collateral/security/cloud-websecurity/data_sheet_c78-729637.html Cisco WSA: Cisco Web Security Appliance https://www.cisco.com/c/en/us/products/collateral/security/content-security-management-appliance/datasheetc78-729630.html Cisco ESA: Email Security
Appliance

QUESTION 3
A link state routing protocol wants to connect tow separate domains, what should be configure ((it\\’s a question about
IS-IS)?
A. Level 1 router
B. Level 1 router interface
C. Level 2 router interface
D. Level 2 router
Correct Answer: D

QUESTION 4
What is the purpose of an OTV edge device?
A. connect to other data centers
B. connect to the access layer
C. connect to the end users
D. connect to mobile devices
Correct Answer: A
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/whitepaper/DCI3_OTV_Intro/DCI_1.html
“Edge Device
The edge device (Figure 1-1) performs OTV functions: it receives the Layer 2 traffic for all VLANs that need to be
extended to remote locations and dynamically encapsulates the Ethernet frames into IP packets that are then sent
across the
transport infrastructure.
[…]
Finally, the OTV edge device can be positioned in different parts of the data center. “

QUESTION 5
Which protocol should be configured if a network administrator wants to configure multiple physical gateways to
participate simultaneously in packet forwarding?
A. HSRP
B. VRRP
C. GLBP
D. VTP
Correct Answer: C

QUESTION 6
DRAG DROP An engineer must provide segmentation for a shop floor environment that has only a single /24 network
available. Each area of machinery needs to have its own subnet. Drag and drop the subnet from the left onto the
corresponding IP addressing design on the right. Not all options are used.
Select and Place:

Correct Answer:

QUESTION 7
An engineer must create a BGP design that allows traffic load balancing. Which BGP feature must be enabled manually
to achieve this design?
A. maximum-paths
B. extended communities
C. confederations
D. maximum-prefix
Correct Answer: A

QUESTION 8
Multicast PIM-Sparse mode sends traffic overload. Which feature can reduce the multicast traffic in the access layer?
A. IGMP snooping
B. Filter at Boundaries
C. PIM Dense-Mode
D. MSDP
Correct Answer: A

QUESTION 9
Which two options are VRF components? (Choose two.)
A. RIB
B. VSS
C. FIB
D. HSRP
Correct Answer: AC

QUESTION 10
Which three major points are important for network virtualization to separate logical networks on a shared physical
infrastructure? (Choose three.)
A. VLANs
B. data plane
C. control plane
D. VPNs
E. VSANs
F. management plane
Correct Answer: BCF

QUESTION 11
Which statement best describes Cisco OTV internal interfaces?
A. They are Layer 2 interfaces that are configured as either access or trunk interfaces on the switch.
B. They are interfaces that perform Layer 3 forwarding with aggregation switches.
C. They are the interfaces that connect to the ISP.
D. They are tunnel interfaces that are configured with GRE encapsulation.
Correct Answer: A
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/whitepaper/DCI3_OTV_Intro/DCI_1.html
“Internal Interfaces To perform OTV functionality, the edge device must receive the Layer 2 traffic for all VLANs that
need to be extended to remote locations. The Layer 2 interfaces, where the Layer 2 traffic is usually received, are
named internal interfaces”

QUESTION 12
An engineer is designing an infrastructure to use a 40 Gigabit link as the primary uplink and a 10 Gigabit uplink as the
alternate path. Which routing protocol allows for unequal cost load balancing?
A. OSPF
B. RIP
C. EIGRP
D. BGP
E. IS-IS
Correct Answer: C

QUESTION 13
DRAG DROP
Drag and drop the Data Center traffic flow characteristics from the left onto the correct traffic flow types on the right?
Select and Place:

Correct Answer:

Free | latest Cisco 300-320 exam dumps

Get latest updated 300-320 Dumps Pdf Visit here: https://drive.google.com/open?id=1uRVZs3xFrenG9HR0t2apjT7rA8y9AULY

geekcert can help you prepare for the actual 300-320 exam. It provides you with the latest and relevant online exam questions. https://www.geekcert.com/300-320.html has all the real materials available for the 300-320 exam. geekcert offers real 300-320 dumps questions and answers. These types of materials are available in PDF document files and are available for free for 120 days.